Dura-Belt   800-770-2358

Liveroller Conveyor Belts

(Shaft Driven Belt)

Standard 83A Liveroller Belts
Standard 83A
Liveroller Belts

HT Blue Liveroller Belt 85A
HT Blue 85A
Liveroller Belt

HEHT Black 88A Belts on Speedup spool
HEHT Black 88A Belt
on Blue Speedup Spool

Super Red 90A Liveroller Belts
Super Red 90A
Liveroller Belts

Rough Green 88A Liverollers Belts
Rough Green 88A
Liveroller Belts

Made from 100% pure virgin urethane (no regrind or blends), our cord costs more than cord containing regrind, but it typically lasts significantly longer and provides greater drive.

Standard 83A Liveroller Belts (clear or orange color):  Made from Cyclothane-A or Cyclothane-E. Standard diameters are 1/8" (3.2mm), 5/32" (4mm), 3/16" (4.8mm), .210" (5.3mm) , 6mm, 1/4" (6.3mm), 5/16" (8mm)and 3/8" (9.5mm), but other diameters are available. Stretched 10% to 12%. Moves boxes weighing up to 20 lbs/roller (9 kg/roller).

HT Blue Liveroller Belt (High Tension, 85A):  Made from Cyclothane-B. Standard diameters are 3/16" (4.8mm), .210" (5.3mm), 6mm, 1/4" (6.3mm) and 5/16" (8mm). Stretched 15% to 20% -- produces 30% more drive tension than standard liveroller belts. Moves boxes weighing up to 25 lbs/roller (11 kg/roller).

NewHEHT Black Liveroller Belt (Highly Elastic, High Tension, 88A):  Made from Cyclothane-A. Standard diameter 7/32" (5.6mm). Stretched 15% to 30%. Necks down to fit in 3/16" groove. Produces 70% to 90% more drive tension than standard liveroller belts. One sizes fits variable center distances. Ideal for regular and speedup spools. Lower installation tension makes it easy to install. Moves boxes weighing up to 40 lbs/roller (18 kg/roller)

Super Red 90A liveroller Belts:   Made from 90A durometer Cyclothane-A. Standard diameters are 1/8", 5/32", 3/16", 7/32" and 1/4" (3mm, 4mm, 5mm, 5.6mm and 6mm). Stretched 12% to15% -- produces 70% to 100% more drive tension than standard liveroller belts. 3/16" (5mm) belt moves boxes weighing up to 36 lbs/roller (16 kg/roller). 7/32" (5.6mm) belt moves boxes weighing up to 44 lbs/roller (20 kg/roller). 1/4" (6mm) belt moves boxes weighing up to 50 lbs/roller (23 kg/roller).Can practically double your conveyor's capacity -- with comparable belt life. Also lets you nearly double throughput by stacking boxes. Ideal for merges and curves where extra drive is needed.

New:  Our softening process reduces Super Red belts' initial tension, facilitating installation and eliminating the need to run-in belts over night. Be sure to specify "Softened". Without softening. the initial tension exerted by Super Red belts is so high that we recommend running-in the conveyor overnight without any accumulation. Excessive accumulation immediately after unsoftened belt installation could overheat the spools. In addition, these belts exert greater pressure on c-clips, which might cause weak ones to slip. To prevent this we recommend placing two c-clips on the downstream side of the spools. C-clips are not needed on the upstream side of the spools. See How to prevent c-clips from slipping

Rough Green 88A Liveroller Belts:   Made from 88A durometer Cyclothane-A. Standard diameters are 3mm, 4mm, 5mm and 6mm. Stretched 9% to11%. Ideal for high speed applications (over 250 feet/min), especially curves, where belts rub so hard against roller grooves that smooth belts tend to abrade. Their hard, rough surface makes them more abuse resistant. Harder cord also provides about 30% more drive than 83A belts. Note that their rough surface slips easier due to less surface contact, but there is no loss in driving force because standard liveroller spools slip before the belts slip.

Liveroller (Shaft Driven) Lineshaft Conveyor Manufacturers (listed alphabetically):  Automated Conveyor Systems (ACSI), Daifuku (Wynrite), Conveyor-Units, Dyno, Hytrol, Lewco, Metzgar, Omni-Metalcraft, Roach, Sierra Conveyor, MHS-TGW-Ermanco, Webb-Styles

For the best in liveroller belts (shaft driven belt), insist on Dura-Belt.

Copyright © 2019 Dura-Belt, Inc.  All Rights Reserved.  Site Index